A prop similar to the 1887 Winchester 12 Gauge Lever Action Shotgun – As Seen in the Terminator 2 (Rosebox)
This is a non-functional full scale prop.
Recommended Print at .15 for a nicer finish. Image above is for reference only, and yours may differ.
Infill minimum 20% recommend 25%
Speed based on your printer.
Once printed, can be assembled in less than 5 minutes (allowing for glue to dry).
Guides in the end of each barrell section means a straight finished prop.
The trigger can be removed for Conventions (Recommended)!
Always use a safety plug when in public.
You will still need to do a touch of trimming, sanding and painting to desired look you want.
You may also want to fill in the seams with a good plastic filer and paint (acrylic).
The lever action is for demonstration only and does not eject shells.
Please feel free to contact me if you have any questions.
This prop can be made to look very realistic. Use caution when taking it outside and always use safety plugs provided. This prop was meant to be a collectors item or used as a prop for COSPLAY and conventions.
These works are licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.